Sun Visor Extension Car Windscreen Sun Protection Anti-Glare Blend
Precio habitual
$24.99
Precio habitual
$24.99
Precio de oferta
$50.00
Precio unitario/ por
AHORRA 50%
Agotado
THE SMALL FIX FOR A BIG DISTRACTION
When the sun drops below your visor, bring the shade with it.
That flash of low sunlight can turn a familiar drive into a constant cycle of squinting, leaning and readjusting. Your factory visor is close to doing the job—but its edge does not always reach the light.
Clip on extra, adjustable coverage right where the gap appears.
Fits many standard car visors. Check the measurements before ordering.
Extra shade without changing your car.
SOUND FAMILIAR?
The most frustrating glare finds the gap.
It is not always the brightest day that feels most uncomfortable. It is the angle: morning commutes, late-afternoon turns and a low sun that slips under a fixed visor.
01
The visor stops too high
Lower the factory visor and the sun can still sit just below its edge.
02
You shift instead of the shade
You lean, change your posture or keep moving the visor as the road changes direction.
03
One position never fits every drive
The light moves. A fixed visor does not give you much room to respond.
The answer is not to cover more of the road. It is to position shade more precisely.
THE VISUAL COMPARISON
Keep your driving position. Move the shade instead.
See what an added panel is designed to do when low sunlight passes beneath the original visor.
BEFORE
Factory visor only
LOW-SUN GAP
The fixed edge may leave a bright strip where you need to look.
AFTER
With adjustable extension
ADJUSTABLE SHADE
Position the extra panel over the gap while keeping the roadway in view.
Illustration only, not a measured before-and-after result. Actual effect varies with vehicle, seating position and lighting. Never obstruct the road, mirrors or signals.
WHY THIS DESIGN WORKS FOR DAILY USE
Four practical details. One less thing to fight on the drive.
↕
Reach the troublesome angle
The adjustable extension helps place a panel where the original visor cannot reach. The product listing states an approximate adjustment range of 11.5–19 cm.
◌
Set a comfortable angle
Pivot and position the panel for your own seat height and the direction of the incoming light.
Ⅱ
Choose between two tints
Grey and yellow-tinted panels give you two ways to manage changing light. Use a panel only when it preserves a clear view.
✓
Clip on, then take it with you
The push-button clip attaches to many standard sun visors without screws or permanent modification.
The panel, hinge and clip are made to move with your needs.
A CLOSER LOOK
Adjust the visor, not your whole routine.
There is no need to replace the factory visor or change the car interior. The extender is designed to clip onto the visor already above you, then offer another panel position when the light moves.
Clip-on mount: no drilling or tools for installation.
Movable panel: tilt or reposition to respond to the light.
Two lens tones: grey and yellow-tinted panels in one unit.
Reversible setup: remove it without a permanent vehicle change.
SIMPLE SETUP
From the box to your visor in a few simple steps.
No workshop, wiring or permanent installation—just a clip-on accessory you can adjust before you drive.
1
Check the visor fit. Compare your visor with the dimensions below before attaching.
2
Open and position the clip. Place it over a suitable part of your existing sun visor.
3
Secure the mount. Make sure it is stable before setting off.
4
Adjust the panel. Set the angle while parked, then fold it away whenever it is not needed.
Use the image as a visual guide; follow the readable steps alongside it.
BEFORE YOU ORDER
A better fit starts with a quick measurement.
The supplied size graphic shows a lens width of about 32 cm / 12.6 in, a lens height of about 12 cm / 4.72 in, and an approximately 18.5 cm / 7.28 in overall vertical measurement in the pictured setup.
Compare those dimensions with your windshield, mirror placement and factory visor. Fit can vary by vehicle, so this is not a universal-fit promise.
In the package1 clip-on sun visor extender with grey and yellow-tinted panels.
Approximate dimensions shown in the supplied product image.
GOOD TO KNOW
Answers before you add it to your car.
Will it fit my vehicle?
It is designed for many standard sun visors, but visor thickness, shape, mirror position and windshield space vary. Check the product dimensions and your own car before ordering.
Do I need tools?
No. The design uses a clip-on mount. Attach it securely and set the panel position while the vehicle is parked.
Can I use it at night?
Only use a tinted panel when you can clearly see the road, other vehicles, signs and signals, and when local rules permit. Fold it away in darkness or poor visibility if it restricts your view.
Does it replace my original visor?
No. It is an accessory designed to attach to your existing visor and add adjustable coverage.
READY FOR A MORE COMFORTABLE COMMUTE?
Let the shade follow the light.
A small adjustment can make that familiar low-sun moment less frustrating. Check the fit, choose your options and keep your view of the road clear.