🎉Carbide-Tipped Reciprocating Saw Blade for Brick & Masonry
🎉Carbide-Tipped Reciprocating Saw Blade for Brick & Masonry
SALE ENDS SOON
Couldn't load pickup availability
- Secure checkout SSL encrypted, never stored
- 30-day returns Exchange or full refund
- Tracked shipping Live tracking on every order
Put Your Reciprocating Saw to Work on Masonry
A steel-backed blade with tungsten carbide teeth, designed for rough, straight cuts in suitable brick and porous masonry materials. Check the blade specification and your saw's compatibility before starting.
Check the Supplied Blade Specification
The reference graphics show a wider blade and markings that may differ from the supplied model. Confirm actual dimensions, tooth specification and saw fit from the package before use. Do not rely on pictured measurements alone.
Tungsten Carbide Teeth
Hard cutting tips designed for the abrasive demands of suitable masonry materials.
Sturdy Steel Backing
A supporting steel body provides a robust base for renovation and demolition cutting tasks.
Masonry-Focused Design
Intended for brick, aerated concrete and other specified porous building materials, not every type of concrete.
Universal-Style Shank
Designed for compatible reciprocating saw blade clamps. Always verify your specific tool and material requirements.
A Practical Blade for Renovation Work
When a project calls for trimming suitable masonry blocks or making a rough cut during removal work, choose a blade built for the material. Carbide teeth and a steel backing make this a focused addition to your reciprocating saw setup.
Choose the Right Material
- Brick and lime-sand brick
- Porous and aerated concrete blocks
- Suitable cement composite panels
- Cement bricks without stone aggregate
Not intended for concrete containing stones. Do not assume suitability for reinforced concrete or metal.
Fit Comes Before the First Cut
The universal-style shank is intended for compatible reciprocating saws, including suitable corded and cordless models. Brand examples in the graphic do not establish compatibility with every model. Check the clamp, supported blade size and your saw manufacturer's guidance.
Rough Cuts With Material-Aware Control
Use an appropriate speed and steady feed pressure according to your saw and blade instructions. Cutting results depend on the material, tool, blade condition and technique. This is a masonry cutting blade, not a guarantee of a polished edge or dust-free work.
Images are illustrative. Claims of reduced dust, lower vibration or cutting speed are not quantified performance guarantees. Power tools and work materials shown are not included.
Product at a Glance
| Blade type | Carbide-tipped reciprocating saw blade |
|---|---|
| Construction | Steel backing with tungsten carbide teeth |
| Shank | Universal style; tool compatibility must be checked |
| Intended work | Rough, straight cutting in specified masonry materials |
Prepare Before You Cut
- Confirm material suitability, blade specification and saw compatibility.
- Disconnect the power or remove the battery before fitting or changing the blade. Secure it as directed by the saw manufacturer.
- Secure the workpiece, check for hidden services and set up suitable dust controls and protective equipment.
- Follow the tool instructions during cutting. Let the blade stop and cool before handling or removal.
Masonry Dust Still Requires Protection
Cutting masonry can release hazardous dust, including respirable silica. Use suitable dust extraction or other approved controls, eye and hearing protection, and appropriate respiratory protection for the task. Do not cut unknown hazardous materials or structural elements without proper assessment. Stop if the blade binds, is damaged or loses teeth.
Match the Blade to the Job
A carbide-tipped option for suitable masonry tasks, with compatibility checks and careful preparation first.
